The structure is made of a frame with one horizontal carriage which slides in its rear section. Both are made of electro-welded steel and are submitted to an accurate working under extremely high precision machining centers.
The axis slide on high precision, reliable linear guide ways with reliable linear guide-ways with recirculation ball block and are automatically lubrified by one pump with grease.
The independent axes are controlled by means of:-Rack and pinion helicoidals for X/Y/Z Axis-The Z Axis drive is equipped with an electromagnetic brake which blocks in case main power is cut off. The servomotors are of digital type; allows a quick adjustment and give an high positioning speed when working.
Spindle head made by Italy HSD (world leading company in this field).Equipped with 5,5 Kw. Rotation speed up to 18.000 rpm, cooling with air. ISO 30 tool complying and relative pressure detecting micro switches for tool presence and complying release.The W axis allows the working in all three sides of the profile and also in the intermediate working.The electrospindle rotation speed is managed by the CNC (CNC OSAI).
The lubrication of the tool is done by lubricator VENTURI or by pure oil with liquid recovery using the micro drop system (minimal lubrication).
Located into the basement, it has 6 slots and the pneumatic opening of the same is geared by control CNC OSAI.
The working area is composed by 4 pneumatic vices for blocking the profiles. They are sliding in linear guide-ways and their blocking is pneumatic. Movement managed by numeric control. The working area is equipped with one pneumatic fence (left side).
It contains inverter, drives and the numeric control unit. The control console is located on the right side of the machine. It has an IP55 protection grade against dust and liquids.
The command consol is separated from the electric cabinet.
CNC machining center controlled by CNC able to work on aluminium, light alloys,PVC and iron.
The machine is fitted with an electricspindle (5.5 Kw. 18.000 rpm) with shank according with ISO 30 rule,
preset for an automatic tool change. The tool magazine, can store till 6 tools to drill, mill and to thread .
Equipped with 4x standard vices. Kit lubrication by VENTURI.
Full head’s cap and 3 replacements for swarfs.
WORKING TABLE CAN BE ROTATED AT EVERY DEGREE INCLUDED IN 180° ±90°.
Max. X aixs movement 3.5m
Max. Y aixs movement 0.7m
Max. Z aixs movement 0.5m